Camber and caster correction equipment
Maximum Value: High profitability equipment
Correct camber deviations of up to 1° in just 10 minutes — without lowering the suspension, replacing bolts, or heating parts.
High-ROI equipment for shops seeking accelerated payback and predictability in geometry services.
- Patented equipment
- More than 140,000 units sold
- 100% compatible with McPherson suspension
Demonstration
GH900 US — camber correction on McPherson suspension
See how the GAHO KIT applies up to 4 tons of thrust at the knuckle, with McPherson compatibility and a clear shop-floor workflow.
High-profit technical alignment
GAHO precision on the shop floor, geometry with real ROI.
Technical differentiators
High-ROI equipment for shops seeking accelerated payback and predictability in geometry services.
Proper use lets you correct up to 1° of camber in about 10 minutes with no need to drop the suspension, swap fasteners, or heat components.
Advanced engineering delivers up to 4 tons of force at the front knuckle without stressing the strut shaft, making suspension correction straightforward and not requiring highly specialized staff.
Executive view
Business benefits
Tangible operational gains — not generic promises, but impact on the shop floor and the P&L.
Fast correction: up to 1° camber in minutes
Roughly 10-minute cycles without dropping the axle, heating parts, or damaging the strut — less idle time in the bay.
Engineering: 4 t thrust on McPherson
Hydraulic cylinder with up to 4 tons of thrust at the knuckle while protecting the strut shaft. Full McPherson compatibility.
Authority and track record
Patented equipment, 140,000+ units in the field, and accelerated ROI for your operation.
Spec sheet
Kit components
- Hydraulic pump
- Double-acting piston
- Universal base 4.2
- Universal base 6.2
- Measuring rule
- Clamp
- Caster support
- Caster shim
- Extension
- Washer 5/8
- Washer 3/4
- Bolts / Nuts
- Bolts / Nuts
- Bolts / Nuts
- Nuts x 6 (1/2" x 20)
Premium details
Product gallery
Shop-floor process
How it works
Operational sequence — quick to read, clear steps.
Assessment and safety
The alignment tech reviews suspension structure to ensure components can handle the load, per the manual for each vehicle.
KIT coupling
Mount the GAHO GH900 US on McPherson references with controlled hydraulic thrust at the knuckle without loading the strut shaft.
Camber correction
Progressive adjustment to the target angle (up to 1° depending on application) without dropping the suspension or heating parts.
Verification and delivery
Final geometry check and vehicle release with traceability aligned to your service standard.
Engineering
Technical differentiators
The primary differentiator is highlighted; the others support the technical story.
- Primary
Hydraulic cylinder — up to 4 tons of thrust
Force applied at the front knuckle to straighten the suspension without compromising the strut shaft.
100% McPherson suspension compatibility
KIT designed around the most common McPherson geometry in the field — consistent application logic bay to bay.
No thermal teardown workflow
Avoids dropping the suspension, torching hardware, or damaging parts when the procedure follows the manual.
Spec sheet
Specifications
Data for engineering and purchasing — quick verification.
Recommended for corrections up to 1°, always observing the suspension structure and the limit specified in the equipment instruction manual for each vehicle.
GAHO context and authority
- Patented equipment with more than 140,000 units sold
- GAHO engineering for geometry productivity in the bay
- Training and support on the GAHO standard across Latin America
Ready to take your shop to the next level?
Talk to a GAHO specialist for a technical proposal covering scope, application, and terms for your workshop or network.